BFT75

BFT75

MID RANGE

Tohatsu’s 75 hp Four Stroke is one of the lightest outboards in its class, weighing in at just 359 pounds. This in-line 4 cylinder is equipped with SOHC, or single overhead cam, to deliver excellent torque and power. The BFT 75hp also features a Optimized Fuel Injection system that delivers the precise amount of fuel/air to each cylinder. The result is an easy start and instant throttle response with superior fuel efficiency. Our 75 hp engine comes with a high output 44 amp alternator that produces nearly twice as many charging amps as some competitors.

The 75 hp four stroke is a great choice because it is our most advanced technology in a mid-range engine.

Tohatsu 75 hp 4-Stroke Benefits

  • High output 44 amp alternator that produces nearly twice as many charging amps as some competitors
  • Weighing in at only 359lbs makes the BFT75 one of the lightest motors in its class
  • In-line 4 cylinder SOHC, dual intake valves help deliver excellent torque and power
  • Double sealed multi-layered paint process to help protect against corrosion
  • Ultra-low 3 star CARB emission approved
  • 5 Year limited warranty

4-Stroke Technology

  • Dual stage induction for improved performance
  • Lean burn control for better fuel economy at cruising speeds
  • Maximum Acceleration System helps to deliver an exceptional hole shot
  • 3-way cooling system to help protect against overheating
  • A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Optimized fuel injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

  • Through the prop exhaust for a quieter ride
  • Built-in freshwater flushing system for easy routine flushing
  • Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
  • Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

  • Low oil pressure warning
  • Overheat warning
  • Start-in-gear protection
  • Over-rev. limiter

FEATURES

4-front Corrosion Protection System

A patented, “Double Sealed” multi-layered paint process, sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

SPECIFICATIONS

Engine (No. of Cylinder)4 Cylinder SOHC
Output75 hp (55.9 kw)
Displacement1,496 cc (91.3 cu.in.)
Bore x Stroke73 x 89 mm (2.9 x 3.5 in)
StartingElectric
Control TypeRemote Control
Gear ShiftForward – Neutral – Reverse
Gear Ratio2.33:1
Ignition SystemMicroComputer Programmed
Transom Height20″
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity1.24 gal. (4.4 L) w/filter
Weight*364 lbs. (165 kg)
Alternator Output12V, 420W, 44A
Max. RPM Range5,000 – 6,000
Programmed Fuel InjectionStandard
Digital CD Ignition SystemStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
* Weight specification is based on the lightest version.
** FC-W® is a registered trademark of the National Marine Manufacturers Assoc. (NMMA)
Specifications and descriptions are subject to change without notice.
ModelMSRPShaft LengthCylindersElectric StartRemote ControlPower
Trim &Tilt
BFT75ALRTA$12,454204SSS
S:Standard
  • MSRP is the “Manufacturer’s Suggested Retail Price” (US$). Actual retail price may vary. Please contact your local dealer for actual retail price.
  • Specifications subject to change without notice. Additional models and/or configurations may be available. Contact your local dealer for details.